Integration Designer 9 General Programming

Creating a Macro with both IR and RF commands
There are some applications that require infrared commands to be sent directly from an RTI handheld or in-wall controller, while at the sametime sending a t...
Fri, 15 Sep, 2017 at 9:15 AM
Using the "Flag" Macro option to simulate discrete power commands
The Flag step is used to keep track of system status and act based on that status. There are multiple flags available, which you can set or clear under macr...
Fri, 15 Sep, 2017 at 9:30 AM
Zigbee® / ZM-24 Transceiver Module Installation
IMPORTANT ZIGBEE® INSTALLATION NOTES - PLEASE READ POWER • Do not use the power supply with a ZM-24 that is hard-wired to a control processor. • Plug ...
Fri, 15 Sep, 2017 at 10:12 AM
433MHz Radio Frequency (RF) Troubleshooting
RTI handheld controllers that use the 433.92 MHz radio frequency send trigger codes to an RTI central control processor. Since commands (IR, RS232)and macro...
Fri, 15 Sep, 2017 at 10:37 AM
Programming Page Links in a Macro (The “Please Wait” scenario)
In some cases it is necessary to program delays or long strings of commands into macros that cause a button press to take up to 30 seconds or more to comple...
Fri, 15 Sep, 2017 at 10:57 AM
Adding Custom Graphics to Colour Products
In addition to the supplied database of stock graphics that are included with Integration Designer, custom graphics of almost any format may be added to any...
Fri, 15 Sep, 2017 at 11:16 AM